To open or close: hold air vent 1 in the center and turn it to the left (open) or right (closed) as far as it will go.
To set the airflow direction: hold air vent 1 in the center and move it up, down, left, or right.
Rear Air Vents
To open or close: turn controller 1 to the left or right as far as it will go.
To set the airflow direction: hold controller 1 in the center and move it up, down, left, or right.
Driving: Power Supply & Vehicle Start
Safety Warnings
Risk of accident and injury: Never leave children unattended in the vehicle.
Risk of death from exhaust gases: Never leave the engine or auxiliary heating running in an enclosed space without ventilation.
Risk of fire: Regularly check for flammable materials in the engine compartment or exhaust system.
Switching on Power Supply
Requirements: SmartKey in vehicle and recognized; brake pedal not depressed.
Press button 1 once to switch on power supply. Example: activate windshield wipers.
Power supply switches off if driver's door is opened or button 1 pressed twice more.
Starting the Vehicle
Press button 1 twice to start. Indicator and warning lamps illuminate.
Vehicle switches off if not started within 15 minutes or button 1 is pressed once.
Emergency Operation Mode
If the vehicle does not start, place SmartKey in marked space 2 (remove from key ring first).
Vehicle starts after a short time. Remove SmartKey to continue driving.
For further starts, SmartKey must remain in marked space 2.
Remote Online Start
Ensure legal permissions, safety, fuel tank level, and battery charge before remote start.
Maximum two consecutive starting attempts; engine runs for ten minutes per start.
Breaking-in Notes
Drive at varying speeds and engine speeds during first 1,000 miles (1,500 km).
Do not exceed 85 mph (140 km/h).
Shift to next gear before red zone in tachometer; avoid manual downshifts for braking.
Gradually increase engine speed; accelerate fully only after 1,000 miles (1,500 km).
Brake pads, discs, and tires require several hundred kilometers to achieve optimal performance.
Optimized Acceleration
Warning: Wheels may spin; risk of skidding and accidents if ESP® is deactivated.
Ensure no obstacles nearby, vehicle broken in, tires and vehicle in good condition, and high-grip roadway.
Procedure: Engage h drive, straighten steering, select sport program B or C, deactivate ESP®, hold brake, press accelerator fully, release brake after 5 seconds.
After acceleration, reactivate ESP®; drivetrain may become hot and ready for next acceleration after a few minutes.
Notes on Driving
Driver Footwell
Objects: Stow securely to prevent pedal obstruction.
Floor mats: Install securely; do not stack or use loose mats.
Footwear: Wear suitable shoes; avoid high heels, slippers, or platform soles.
Vehicle Operation Warnings
Do not switch off the vehicle while driving; may reduce safety functions.
