If an alert appears on your vehicle's touchscreen, touch Learn More for more details regarding the alert and how it can be resolved (see Troubleshooting Alerts on page 259). You can view a list of vehicle alerts and notifications by touching the bell icon at the top of Controls.
NOTE: Not all alerts provide additional information at this time.
You can restart your touchscreen if it is unresponsive or demonstrates unusual behavior.
NOTE: Restarting the touchscreen also activates the drive mode selector on the overhead console.
NOTE: Pressing the scroll buttons only restarts the touchscreen. It does not restart any other vehicle component and does not power the vehicle off and on.
NOTE: Depending on market region, configuration, and vehicle manufacture date, your vehicle may not be equipped with a rear touchscreen.
The rear touchscreen provides rear passengers with access to the following features:
NOTE: You can also use the front touchscreen to adjust climate settings in the rear cabin.
NOTE: Connect headphones to listen to audio from the rear touchscreen. The vehicle supports up to two Bluetooth devices at a time.
NOTE: Adjusting the media and volume controls also adjusts the front cabin settings.
To control the rear screen from the front display, open the rear screen remote control app from the app launcher. In addition to audio, video, and climate controls, you can lock the rear display in the app or by touching Controls > Display > Lock Rear Display.
For quick access to commonly used apps and controls, you can customize what appears in the My Apps area on the touchscreen's bottom bar:
NOTE: Controls such as defrosters and seat heaters appear in the app tray only when customization mode is active.
Remove an app or control from My Apps by touching and holding it, then selecting the X. If you add more apps than allowed, the rightmost app is automatically removed.
Touch Controls > Display to adjust display settings:
You can also enable Joe Mode to reduce the volume of non-critical chimes by selecting Controls > Safety > Joe Mode.
To personalize your vehicle, you can assign a name. Touch Controls > Software > Name Your Vehicle on the right side of the touchscreen below the vehicle image.
If the vehicle already has a name, touch it to change it, enter the new name, and select Save. The vehicle name also appears in the mobile app.
To remove all personal data and restore factory settings, touch Controls > Service > Factory Reset. This is useful when transferring ownership of the vehicle.
Before erasing, the system verifies your credentials by requesting the username and password associated with your account.
The touchscreen displays the status of the vehicle at all times. What appears depends on whether the vehicle is:
When parked, the status area shows drive mode, estimated range, adjustable settings, and a visual view of the vehicle with buttons to open the tonneau cover (if equipped), tailgate, powered frunk, and charge port door.
When you press the brake pedal, the vehicle powers up and indicator lights flash briefly. If a light remains on or fails to illuminate correctly, schedule a service appointment.
The bottom of the vehicle status display shows shortcut cards for quick access to media, tire pressure information, trip data, and more. Swipe left or right to customize these shortcuts.
The following indicator lights may appear to advise or alert you about vehicle status or conditions.
USA and Mexico:
If the touchscreen displays a red brake indicator at any time other than briefly during startup, a brake system fault may be detected or the brake fluid level may be low. Contact service immediately. Apply steady pressure to the brake pedal to safely stop the vehicle.
Canada:
If the red brake indicator appears other than briefly during startup, a brake system fault may be detected or brake fluid level may be low. Contact service immediately.
