Panoramic glass roof
Operating the panoramic glass roof and roof sunshade
Applies to: vehicles with panoramic glass roof and roof sunshade
The control buttons are equipped with a two-stage function. When tilting or opening the roof,
the roof sunshade will open partially or halfway if the sunshade is closed.
Operating the roof sunshade
-
Opening and closing the sunshade: push the switch in the headliner briefly toward the rear or forward to the second level.
-
Partially opening the sunshade: press the switch to the first level until the sunshade reaches the desired position.
Operating the roof
- Tilting the roof: press the switch in the headliner briefly up to the second level.
- Closing the tilted roof: pull the switch down briefly to the second level.
- Opening the roof: slide the switch back briefly twice in a row to the second level.
- Closing the opened roof: push the switch forward briefly to the second level.
- Opening or closing partially: slide the switch to the first level and hold until the roof reaches the desired position.
Quick opening
You can also open the roof and roof sunshade in one movement. Push the switch back briefly to the second level twice in a row.
Roof emergency closing
If an object is detected when closing, the roof will open again automatically. You can then close it using the power emergency closing function within five seconds.
Warning
- Observe the safety precautions.
- To reduce the risk of injury, always pay attention when closing the roof. Switch the ignition off and take the key with you when leaving the vehicle.
Note
Always close the roof when you leave the vehicle and when there is precipitation to reduce the risk of damage to interior equipment, particularly electronic equipment.
Tips
- After switching off the ignition, the roof and sunshades can still be operated for several minutes as long as neither front door has been opened.
- It is not possible to open the roof when temperatures are too low.
Valet parking
Applies to: vehicles with valet parking function
The valet parking function can protect the luggage compartment from unauthorized access. The [VALET] button is located in the glove compartment.
- Switch on the valet function when someone else is parking the vehicle. The vehicle can be driven, locked, and unlocked using the vehicle key, but access to the luggage compartment is blocked.
- Remove the mechanical key and press the [VALET] button in the glove compartment. The LED turns on when the function is active.
- Lock the glove compartment with the mechanical key.
- In vehicles with lockable backrests in the rear, lock the backrests to secure the luggage compartment from the vehicle interior.
- Give your vehicle key to service personnel who are parking your vehicle and keep the mechanical key.
Deactivated buttons during valet parking
- Button in the driver's door
- Button on the vehicle key
- Handle in the luggage compartment lid
Tips
- The luggage compartment can still be accessed from the vehicle interior in vehicles with fixed or unlockable rear seat backrests.
- This function is not available in all countries.
- The number of hand-held transmitters depends on equipment.
Garage door opener
Applies to: vehicles with garage door opener
With the garage door opener, you can activate systems such as garage doors, security systems, or house lights from inside your vehicle. Multiple receivers can be programmed to control up to eight hand-held transmitters.
Warning
- When operating or programming the garage door opener, ensure no people or objects are nearby.
- Do not get distracted from traffic while using the center display.
Tips
- If you sell your vehicle, reset all settings to factory defaults.
- The system complies with FCC and ISED regulations.
- Check compatibility before programming: consult an authorized Audi dealer, service facility, or www.homelink.com.
- You can display HomeLink information in the MMI: VEHICLE > Settings & Service > Garage door opener.
