Subaru FORESTER 5th Generation 2019-2024 Windows and Rear Gate Car Owner Manuals

Subaru FORESTER 5th Generation 2019-2024 Windows and Rear Gate

Windows and Rear Gate

Locking the Passengers’ Windows

1. Lock
2. Unlock

To lock: Press the lock switch. When the lock switch is in the lock position, the passengers’ windows cannot be opened or closed.

To unlock: Press the lock switch again.

Power Window Operation by Passengers

Passenger’s Side Power Window Switches

Each passenger window can be controlled by the power window switch located on the door.

Operating the Front Passenger’s Window

1. Automatically open/close (if equipped)
2. Open/close

To open: Press the switch down lightly and hold it. The window will open as long as the switch is held.

NOTE: Holding the AUTO switch down after the window is fully open may trigger the circuit breaker. Wait a few seconds to reset.

Some models have a one-touch auto down feature: press until it clicks and release. To stop halfway, pull the switch up lightly.

To close: Pull the switch up lightly and hold it. Similar AUTO function warnings apply.

For one-touch auto up/down reactivation after battery disconnection, refer to “Initialization of power window” F2-38.

Operating the Rear Passengers’ Windows

To open: Press down and hold the switch until the window reaches desired position.

To close: Pull up and hold the switch until the window reaches desired position.

If the driver’s lock switch is in lock position, passenger switches cannot operate.

Initialization of Power Window

If battery disconnection occurs, one-touch auto up/down and anti-entrapment functions are deactivated. Initialize as follows:

1. Close the driver’s door.
2. Turn ignition switch to “ON”.
3. Open driver’s side window halfway by pushing down the switch.
4. Pull up switch and close window completely, holding 1 second after fully closed.
5. Open driver’s side window completely by fully pushing down the switch.

Rear Gate

Manual Rear Gate (if equipped)

The rear gate can be locked/unlocked via:

• Power door locking switch
• Keyless access with push-button start (if equipped)
• Remote keyless entry system

To open: Unlock, press and hold rear gate opener button, lift gate slowly.

NOTE: If battery is discharged or system malfunctions, unlock using manual rear gate lock release lever.

To close: Lower rear gate slowly and push firmly until latch engages.

Warnings and Cautions

• Keep rear gate closed while driving to prevent exhaust entry.
• Avoid closing the rear gate using recessed grip from inside.
• Do not jam items or use tape on gate stays; avoid hitting your head while opening/closing.

Power Rear Gate (if equipped)

• Ensure no people are around when opening/closing.
• Electronic chirp sounds if operating conditions not met; gate may stop suddenly.
• After opening on a slope, ensure rear gate stops completely.
• Always carry the key and never leave unattended children in vehicle.
• Use power rear gate button, not manual force, to avoid damage.

Operating Conditions

• Vehicle must be stopped.
• Outside temperature between −22°F and 158°F (−30°C to 70°C).
• Ignition in “LOCK/OFF” or “ACC”, or “ON” with parking brake applied (MT) / lever in “P” (CVT).

NOTE: Repeated button presses may be ignored. Temporary stopping is not possible between fully closed and ~12 in (30 cm) open. If vehicle moves during operation, buzzer sounds and gate closes automatically. Immediate re-opening may require manual operation.

Operation by Button on Instrument Panel

To open: Press and hold power rear gate button when gate is closed. Electronic chirp sounds twice and hazard flashers flash twice. Gate opens automatically.

To stop midway: Briefly press the button again.