NOTE: For models with “keyless access with push-button start systemâ€, refer to “Keyless access with push-button start system†F2-9.
Three types of keys are provided for your vehicle: Master key, submaster key, and valet key. The master key and submaster key fit all locks on your vehicle, including:
The valet key fits only the ignition switch and door locks. You can keep the glove box locked when you leave your vehicle and valet key at a parking facility.
The key number is stamped on the key number plate attached to the key set. Write down the key number and keep it in another safe place, not in the vehicle. This number is needed to make a replacement key if you lose your key or lock it inside the vehicle. Refer to “Key replacement†F2-4.
The immobilizer system prevents unauthorized engine start. Only keys registered with your vehicle’s immobilizer system can operate your vehicle. This system is not a 100% anti-theft guarantee.
For models with keyless access: If you press the push-button ignition switch with an unregistered key, the switch will not turn to “ON†and the engine will not start. Follow “Starting engine†F9-18 if needed.
For models without keyless access: Even if an unregistered key fits the ignition, the engine will stop automatically after several seconds. Pull out the key and try again if the engine does not start. Refer to “Ignition switch (models without push-button start system)†F3-4.
Refer to “Security indicator light†F3-30.
Your key number plate is required for replacements. New keys must be registered with your vehicle’s immobilizer. Maximum keys:
A previously registered key is required to register a new key. Lost key ID codes remain in memory; erase them for security. Contact your SUBARU dealer for registration or erasure.
NOTE: Unlocking the driver’s door with a key while the alarm is armed triggers the horn. To prevent this:
To lock the driver’s door from outside with the key, turn it forward; to unlock, turn it rearward. Pull the handle to open an unlocked door.
NOTE: For keyless access models, the mechanical key is directional; adjust orientation if it does not insert.
Using lock lever:
Using power door locking switch:
All closed doors and rear gate lock simultaneously. Ensure all doors and rear gate are locked before leaving. Do not leave the key inside when locking without a key.
Rotate the lock lever forward to lock, rearward to unlock. The red mark indicates an unlocked door. Pull the inside handle to open an unlocked door.