Mitsubishi L200 19MY L200 2018-2020 Seat Adjustment Car Owner Manuals

Seat Adjustment

Adjust the driver’s seat so that you are comfortable and able to reach the pedals, steering wheel, and switches while maintaining a clear field of vision.

WARNING

• Do not attempt to adjust the seat while driving. This can cause loss of vehicle control and result in an accident. After adjustments are made, ensure the seat is locked in position by attempting to move it forward and rearward without using the adjusting mechanism.
• It is extremely dangerous to ride in the cargo area (inside or outside) of a vehicle. The cargo area and rear seats should never be used as a play area by children.
• Do not allow anyone to ride in areas not equipped with seats and seat belts. Ensure all occupants are properly seated and wearing seat belts, or secured in a child restraint.
• To minimize injury risk during a collision or sudden braking, keep seatbacks in an almost upright position while driving. Reclined seatbacks reduce seat belt effectiveness and increase the risk of sliding under the belt.
• Do not place objects under the seats. This may prevent secure locking and could cause damage or injury.

CAUTION

• Ensure seat adjustment is performed by an adult or under adult supervision.
• Do not place cushions between your back and the seatback while driving. This reduces head restraint effectiveness.
• The reclining mechanism of the front manual seat is spring loaded. Hold the seatback or sit close to it when operating the lever.
• When sliding the seats, avoid catching hands or feet.
• On vehicles equipped with rear seats (Club cab and Double cab), take care not to inconvenience rear passengers when sliding or reclining seats.

Front Seats

Manual Type*

1. To adjust forward or backward:
   Lift the handle, move the seat to the desired position, then release the handle.
2. To recline the seatback:
   Pull the lever up, lean backward to the desired angle, then release the lever.
3. To adjust seat cushion height (driver’s side only – Club cab and Double cab):
   Turn the dial to adjust the height.

Power Type*

1. To adjust forward or backward: Operate the switch as indicated by the arrows.
2. To recline the seatback: Operate the switch as indicated by the arrows.
3. To adjust seat height: Operate the switch as indicated by the arrows. If the entire switch is operated, the entire seat moves.
4. To adjust seat cushion angle: Operate the switch as indicated by the arrows.

NOTE

• To prevent battery discharge, operate power seat switches while the engine is running.

Heated Seats*

The heated seats operate when the ignition switch or operation mode is ON.

1. HI: High heating (quick heating)
2. OFF: Heater off
3. LO: Low heating (maintain warmth)

The indication lamp (A) illuminates while the heater is on.

CAUTION

• Use the high setting for quick heating, then switch to low to maintain warmth.
• Children, elderly, ill persons, people with sensitive skin, tired individuals, or those under the influence of alcohol or medication may be more susceptible to burns.
• Do not place heavy or sharp objects on the seat.
• Do not use blankets or insulated materials while using the heater.
• Do not clean seats with benzine, kerosene, petrol, alcohol, or organic solvents.
• If liquid is spilled on the seat, allow it to dry completely before using the heater.
• Turn the heater off immediately if it malfunctions.

Rear Seat (Club Cab and Double Cab)*

When a person sits in the middle rear seating position (Double cab), adjust the head restraint to a locked position at appropriate height.

Folding the Seatback Forward (Double Cab)

1. Pull up the band on top of the seatback.
2. Fold the seatback forward.

To return: Raise the seatback until securely locked. Push and pull lightly to confirm it is secure.

Folding Up the Seat Cushion (Club Cab)*

The right and left seat cushions can be folded separately.

• Raise the seat cushion.
• Secure it by hooking the retaining band (A) onto the rear seat head restraint (B).

Armrest (Double Cab)

Fold down the armrest to use. Push it backward to return it level with the seat.

NOTE

• Do not climb or sit on the armrest.
• The armrest contains a cup holder for rear passengers.

Head Restraints*

WARNING

• Always ensure head restraints are installed and properly positioned when seats are occupied.
• Never place cushions between your head and the head restraint.
• For rear center seat (Double cab), raise the head restraint to a locked position before driving.

To Adjust Height

Front Seats:

• Adjust so the center of the head restraint is close to ear level.
• To raise: move upward.
• To lower: push the height adjusting knob (A) and move downward.
• After adjustment, push downward to confirm it is locked.

Rear Centre Seat:

• Raise to locked position before driving.
• To lower: push the height adjusting knob (A) and move downward.

NOTE

• The head restraint height of the outer rear seats cannot be adjusted.

To Remove

Lift the head restraint while pressing the height adjusting knob (A).

To Install

Insert the head restraint into the seatback while pressing the height adjusting knob (A). Ensure the stalk with adjustment notches (B) aligns correctly with the adjusting hole.

CAUTION

• Ensure the height adjusting knob (A) is correctly positioned and confirm the head restraint does not pull out.
• Use only the correct head restraint designed for the specific seat.