Smart Brake Support [Rear] (SBS-R)
System May Detect Objects Such As:
- Hanging curtains, gate poles (toll gates, railroad crossings).
- Foliage, barriers, vehicles, walls, and fences along the road.
- Grass and forage when driving off-road.
- Low gates, narrow gates, car washing machines, and tunnels.
- When a trailer is connected.
- Bright light sources such as sunlight hitting the rear camera.
- Dark surroundings.
- Exterior accessories (e.g., bicycle carrier) installed near the rear sonar.
- (Manual transmission) If stopped by SBS-R and the clutch pedal is not depressed, the engine stops.
- User is notified via the multi-information display when the system operates.
- Collision warning beep sounds intermittently while SBS-R brake operates.
- If stopped and brake pedal is not depressed, “Emergency Braking Activated. Depress Brake Pedal to Hold Stop” appears and brake releases after approx. 2 seconds.
- If a Mazda genuine trailer hitch is used, SBS-R is automatically turned off.
Collision Warning
Continuous Warning Sound Activated
- “BRAKE!” message displayed on multi-information display.
- “BRAKE!” message displayed on active driving display.
Stopping SBS-R Operation
- Can be turned off via Settings.
- Can be turned off using the i-ACTIVSENSE switch.
When turned off, the SBS OFF indicator light illuminates. The system becomes operational again when the engine is restarted.
NOTE: When the SCB-R system is set to inoperable, Smart Brake Support [Rear Crossing] (SBS-RC) is also set to inoperable.
Smart Brake Support [Rear Crossing] (SBS-RC)
The SBS-RC assists in avoiding collisions and reducing damage when reversing out of a parking space.
It detects vehicles approaching from the rear left and right sides and applies brake control when a collision is determined unavoidable.
SBS-RC Operation
- Operates when shift/selector lever is in Reverse (R).
- If collision risk exists:
- Brakes are applied automatically.
- “BRAKE!” displayed on active driving display and multi-information display.
WARNING:
- Always visually check surroundings before reversing.
- System may not operate or may be delayed even if a vehicle is behind.
- Do not rely completely on SBS-RC.
- System responds only to vehicles, not walls, pedestrians, motorcycles, or animals.
Important Cautions
- Do not apply stickers to rear radar or rear camera.
- Do not disassemble radar or camera.
- If cracks or damage are visible, stop using system and consult an authorised repairer.
- Do not modify vehicle suspension or height.
- Do not spray high-pressure water directly on radar or camera.
Operating Conditions
- Engine running.
- Shift/selector in Reverse (R).
- No i-ACTIVSENSE warning displayed.
- Vehicle speed under approx. 10 km/h (6 mph).
- Approaching vehicle speed approx. 3 km/h (2 mph) or faster.
- SBS-R not turned off.
- DSC not malfunctioning.
System Stops If:
- System malfunction occurs.
- Radar sensor installation deviates.
- Snow/ice accumulates on rear bumper.
- Driving long periods on snow-covered roads.
- Radar sensors overheat.
- Battery voltage decreases.
Collision Warning (SBS-RC)
Continuous Warning Sound
- “BRAKE!” displayed on multi-information display.
- “BRAKE!” displayed on active driving display.
Stopping SBS-RC Operation
- Can be turned off via Settings.
- Can be turned off using the i-ACTIVSENSE switch.
When turned off, the SBS OFF indicator light illuminates. System becomes operational after engine restart.
NOTE: When SCB-RC is set to inoperable, Smart Brake Support [Rear] (SBS-R) is also set to inoperable.
360° View Monitor
The 360° View Monitor assists in checking the area surrounding the vehicle at low speeds or while parking
using camera images and warning sounds displayed on the centre display.
Functions
- Top View: Combined image from 4 cameras displayed from above.
- Front View / Front Wide View: Front camera with guide lines.
- Side View: Front left and right camera images with guide lines.
- Rear View / Rear Wide View: Rear camera with guide lines.
- Parking Sensor: Ultrasonic sensors detect nearby obstructions and display distance indication with sound.
- Front Cross Traffic Alert (FCTA): Displays warning if collision risk detected while front/side view shown.
- Rear Cross Traffic Alert (RCTA): Displays warning if collision risk detected while rear view shown.
Monitor Range Includes
- Cameras
- Ultrasonic sensors
- Front and rear side radar sensors
WARNING:
Always confirm safety visually using mirrors and direct observation. The 360° View Monitor is an auxiliary device and has blind spots.
CAUTION:
- Do not use on icy/snow-covered roads.
- Do not use with tyre chains or temporary spare tyre.
- Ensure doors are fully closed.
- Do not hit cameras, bumpers, or mirrors forcefully.
- Do not disassemble or modify cameras.
- Do not use oil removers, solvents, wax, or coatings on camera covers.
- Consult an authorised repairer for repairs or replacements.
NOTE:
- Wipe camera lenses if dirty (use mild detergent if needed).
- Images may appear darker in cold conditions.
- Low battery voltage may temporarily affect display.
- Objects under or above camera range may not be visible.
