Peugeot 208 2016-2022 Cruise Control Car Owner Manuals

Peugeot 208 2016-2022 Cruise Control

Cruise Control

"This is the speed the driver wishes to maintain". This driving assistance system, for use when traffic is flowing, allows a speed set by the driver to be maintained, except on a steep gradient.

Mode Selection

1. Cruise control mode selection / off
2. Increase the registered speed setting
3. Decrease the registered speed setting
4. Cruise control Off / Resume

Activation Requirements

• Manual gearbox: vehicle speed above 25 mph (40 km/h) with 4th gear or higher engaged
• Electronic gearbox: vehicle speed above 25 mph (40 km/h) with 2nd gear or higher in manual mode, or position A selected
• Automatic gearbox: vehicle speed above 25 mph (40 km/h) with 2nd gear or higher in manual mode, or position D selected

Steering Mounted Controls

Place the thumbwheel at the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE).

Registering a Cruise Speed Setting

• Bring the vehicle to the desired speed by pressing the accelerator
• Press the SET + or SET - button to register the speed
• The vehicle will maintain the registered speed, though temporary acceleration is possible

Pause and Resume

• Pause (OFF): press the button or brake/clutch pedal
• Resume: press the button after pausing to return to the last registered speed

Changing the Registered Speed Setting

To register a higher speed: press SET +; a short press increases by 1 mph (km/h), pressing and holding increases in steps of 5 mph (km/h).
To register a lower speed: press SET -; short press decreases by 1 mph (km/h), pressing and holding decreases in steps of 5 mph (km/h).

It is possible to accelerate beyond the registered speed; the system will return to the registered speed once the accelerator is released.

Safety Advice

• Be vigilant when modifying the cruise control setting; speed may change quickly
• Do not use on slippery roads or in heavy traffic
• On steep descents, cruise control cannot prevent exceeding the registered speed
• Ensure floor mats are positioned correctly and never overlap

Operating Fault

If the registered speed setting is erased and replaced by three dashes, have the system checked by a PEUGEOT dealer or qualified workshop.

Switching Off

Without using the accelerator: place the thumbwheel at "0" position; the display returns to total mileage recorder.
After switching off the ignition, all registered speed settings are lost.

Speed Settings via Touch Screen

• Go to main menu → "Driving" menu → secondary page → "Speed settings"
• Select speed to modify → Press "Modify" → Enter new value → Press "Confirm" to save
• Use the buttons to select/deselect all speeds or restore factory settings
• Up to 5 speed settings can be saved for both the speed limiter "LIMIT" and cruise control "CRUISE"

Selecting a Saved Speed

Press and hold the "+" or "-" button; the system stops at the closest saved speed. Press and hold again to select another saved speed. A reminder of the speed and system state (on/off) is displayed in the instrument panel.