Peugeot 208 2016-2022 Bucket seats
Bucket seats
Adjustments
Forwards / Backwards
Lift the control and slide the seat forwards or backwards to the desired position.
Height
Pull the handle upwards to raise the seat or push it downwards to lower it,
repeating as many times as necessary to obtain the required position.
Backrest
Push the handle towards the rear and move the seat backrest forwards or backwards.
Armrest
Comfort and storage system for the driver and front passenger.
Cover with opening lever
- Lift the lever to raise the lid.
Storage space in the console
- Pull the armrest fully up.
Additional adjustments
Heated seats
With the engine running, the front seats can be heated separately.
Use the adjustment wheel to select the heating level:
- 0: Off
- 1: Low
- 2: Medium
- 3: High
One-piece rear seats
Bench seat with fixed one-piece cushion and folding one-piece backrest.
Folding the backrest
- Move the front seats forward if necessary.
- Position the outer seat belts on the backrest and buckle them.
- Lower the head restraints to the lowest position.
- Release the seat backrest by pressing both controls simultaneously.
- Fold the seat backrest onto the fixed cushion.
Raising the seat backrest
- Raise the seat backrest.
- Latch the backrest in place until the red indicators are no longer visible.
- Unbuckle and return the outer seat belts to their normal positions.
2/3 - 1/3 Split Bench Rear Seat
Bench seat with a fixed one-piece cushion and split backrest (left 2/3, right 1/3)
which can be folded individually to increase the boot loading space.
Folding the backrest
- Move the corresponding front seat forward if necessary.
- Position the corresponding outer seat belt against the backrest and buckle it.
- Fully lower or remove the head restraint.
- Release the backrest by pressing the control.
- Fold the seat backrest onto the fixed cushion.
When folding the seat, the centre seat belt should not be fastened,
but laid out flat on the seat.
The rear seat cushion does not fold. Only the seat backrest folds
to increase the boot loading space.
Repositioning the seat backrest
- Raise the seat backrest.
- Secure it, ensuring the red indicator is no longer visible.
- Unbuckle and reposition the seat belts ready for use.
- Refit the head restraints.
Never drive with the head restraints removed; they must be fitted and correctly adjusted.
Ventilation
Air intake
The air circulating in the passenger compartment is filtered and originates either
from outside via the grille at the base of the windscreen or from inside when
air recirculation mode is activated.
Air intake flow
The incoming air follows different paths depending on the controls selected:
- Direct entry into the passenger compartment (air intake)
- Passage through a heating circuit (heating)
- Passage through a cooling circuit (air conditioning)
Control panel
The controls of this system are grouped together on the control panel
located on the centre console.
Air distribution
The incoming air is distributed through several outlets:
- Windscreen demisting and defrosting vents
- Front side window demisting vents
- Side adjustable air vents
- Central adjustable air vents
- Air outlets to the front footwells
- Air outlets to the rear footwells
