What Is the 360 Degree Camera
The 360 degree camera system consists of front, side and rear cameras that provide
visibility around your vehicle.
How the 360 Degree Camera Works
- Shows what is directly in front of or behind your vehicle.
- Provides cross traffic views in front and behind.
- Displays a top-down view of blind spots and nearby obstacles.
360 Degree Camera Precautions
- Always check mirrors and surroundings — the camera is only an aid.
- Objects near bumper corners may not appear on screen.
- Do not operate camera features while the vehicle is moving.
- You remain responsible for vehicle control at all times.
- An open cargo door can distort the camera image.
- Manual zoom reduces visible coverage.
360 Degree Camera Limitations
If a door is ajar, camera alignment may shift and images may be inaccurate.
Camera Locations
- Rear camera: Located on the liftgate.
- Front camera: Located in the grille.
- Side cameras: Located on the exterior mirrors.
Camera Guide Lines
- Active guide lines appear in reverse (R).
- Lines adjust with steering input.
- Red zone = closest, green zone = farthest.
- Use mirrors for full coverage.
Keep-Out Zone: Marked by yellow dotted lines.
Camera Settings
Switching the Camera On and Off
Use the instrument panel camera button. Rear camera activates automatically in reverse.
Front view displays when in park, neutral, or drive.
Switching Camera Views
- Front normal view
- Front split view
- Normal + 360 view
- Rear normal view
- Rear split view
- Hitch view
- Trailer reverse guidance
- Zoom and corner views
Entering a Parallel Parking Space
- Press the parking button.
- Select active park assist.
- Use the turn signal to choose a side.
- Drive slowly while searching.
- Hold brake and shift to neutral.
- Hold parking button.
- Release brake to allow parking.
Entering a Perpendicular Parking Space
- Press the parking button.
- Select active park assist.
- Choose perpendicular parking.
- Search using the turn signal.
- Follow prompts and allow the system to park.
Exiting a Parking Space
- Press parking button.
- Select park exit.
- Choose exit direction.
- Follow prompts until manual control resumes.
Active Park Assist – Troubleshooting
Active Park Fault — service required. Have your vehicle checked.
Active Park Assist – FAQs
Why does it not operate correctly?
- Boundary objects not detected.
Why does it not search for spaces?
- Traction control is off.
- Vehicle is in reverse.
Why is no parking space offered?
- Sensors blocked or damaged.
- Space too small.
- Speed too high.
- Battery recently disconnected.
Why is positioning incorrect?
- Irregular curb or obstacles.
- Tire issues.
- Environmental changes.
Hilly Condition Usage
Select a lower gear when driving downhill with the system active.
Adaptive Cruise Control Limitations
- Sensor performance may vary with lighting or obstructions.
- System may miss stationary or slow vehicles.
- Does not detect pedestrians or oncoming vehicles.
- Blocked sensors disable detection.
The camera is mounted behind the windshield mirror. The radar sensor is located
behind the lower grille fascia. Keep these areas clean for proper operation.
