Front Seats with Manual Adjustment
Longitudinal Adjustment
Lift lever (1) and push the seat forwards or backwards.
WARNING: Carry out the adjustment while sitting on the seat involved.
Height Adjustment
Move lever (2) up or down until the required height is reached.
WARNING: Carry out the adjustment while sitting on the seat involved.
Backrest Angle Adjustment
Use lever (3) to adjust the backrest angle, accompanying it with the movement
of the torso. Release the lever once the desired position is reached.
“SPARCO” Sport Carbon-Shell Seats (where provided)
Longitudinal Adjustment
Lift lever (1) and push the seat forwards or backwards.
WARNING: Carry out the adjustment while sitting on the seat involved.
Height Adjustment (Electrical)
Press button (2) up or down until the required height is reached.
Backrest Angle Adjustment
Use lever (3) to adjust the backrest angle, accompanying it with torso movement.
Electrically Adjustable Front Seats
NOTE: Seat configuration may vary according to version.
The electrical adjustment buttons are located on the outer side of the seat.
Height and Cushion Angle Adjustment
Use the rear part of switch (1) to adjust the seat height and/or cushion angle.
Longitudinal Adjustment
Push switch (1) forwards or backwards to move the seat.
Backrest Angle Adjustment
Push switch (2) forwards or backwards to adjust the backrest.
Electric Lumbar Adjustment
- Top: inflates cushion
- Bottom: deflates cushion
- Front: inflates upper part
- Rear: inflates lower part
WARNING: Electrical adjustment is allowed only with ignition ON or
for approximately 2 minutes after turning ignition to STOP.
Seat Angle Adjustment (Tilting)
Lift or push the front part of control (1) to adjust the front part of the seat.
Release when the desired position is reached.
Backrest Width Adjustment (where provided)
Press switches (4) to adjust backrest width by inflating the side padding.
This improves body support during cornering.
Seat Cushion Extension (where provided)
Lift lever (6) and slide the front part of the cushion forwards or backwards.
Memorising Driver’s Seat Positions
Buttons (5) allow storage and recall of three seat positions.
- Ignition must be ON or within 20 minutes after STOP
- Hold button for 1.5 seconds to store position
- Beep confirms memorisation
- Brief press recalls memorised position
Easy Entry Function
Automatically retracts the driver seat by 60 mm to ease entry and exit.
- Activated with door open and ignition at STOP
- Seat returns to driving position when ignition is ON
- Exit mode retracts seat when door is opened
NOTE: Manual seat movement interrupts automatic positioning.
Front and Rear Seat Electric Heating (where provided)
Front Seats
With ignition ON, press dashboard buttons.
- Maximum heating: 3 LEDs
- Medium heating: 2 LEDs
- Minimum heating: 1 LED
Rear Seats
Press buttons located on the rear part of the central tunnel.
WARNING: Seat heating works only with engine running.
Rear Seats
Rear seats accommodate two passengers (Quadrifoglio) or three passengers (other versions).
WARNING: Seats and seat belts are part of the passenger protection system.
Split Folding Rear Seat (where provided)
Partial Extension (1/3 or 2/3)
- Lower rear head restraints
- Position seatbelts correctly
- Operate lever to fold required backrest section
Full Extension
Fold both backrests forward for maximum luggage space.
Repositioning the Backrests
Lift backrests until locking click is heard on both sides.
Central Backrest Section Tilting
Use the strap to release and tilt the central backrest section.
Head Restraints
Ad
