Hood Operation
Opening
Two latches must be released to open the hood.
- From inside the vehicle, pull the hood release lever located under the left lower side of the dashboard.
- Move outside and stand in front of the grille.
- Slightly lift the hood and push the safety catch located in the center.
- Lift the hood completely. Gas struts keep it open.
With the ignition in RUN, a red symbol and message indicate the hood is open.
Closing
Lower the hood, then gently drop it to secure both latches.
CAUTION: Do not slam the hood to close it.
WARNING:
- Ensure the hood is fully latched before driving.
- Gear shifting remains active even when hood or doors are open — avoid accidental gear engagement.
Occupant Restraint Systems
Your vehicle includes the following safety systems:
- Three-point seat belts for all occupants
- Advanced front air bags
- Side air bag curtains (SABIC)
- Seat-mounted side air bags
- Energy-absorbing steering column
- Seat belt pretensioners
- Automatic Locking Retractors (ALR)
These systems help protect occupants during collisions. Always use them properly.
WARNING:
- Keep seatbacks upright and belts snug.
- Children under 12 should ride in rear seats.
- Never place rear-facing child seats in the front seat.
- All occupants must wear seat belts.
Three-Point Seat Belts
All seating positions use lap and shoulder belts designed to lock during sudden stops or impacts.
Proper Use
- Sit upright and adjust the seat.
- Pull belt across your body.
- Insert latch plate into buckle until it clicks.
- Ensure lap belt rests on pelvis, not abdomen.
- Shoulder belt should cross chest — not neck.
WARNING:
- Never share a belt between two people.
- Do not wear belt under the arm.
- A loose or twisted belt is dangerous.
- Replace damaged belts immediately.
Release
Press the red buckle button. Guide belt during retraction to prevent twisting.
Seat Belt Height Adjustment
Adjust the shoulder belt height while stationary:
- Press slider release.
- Move belt guide to proper shoulder height.
- Ensure slider locks securely.
CAUTION: Adjustment must be done only when the vehicle is stationary.
Seat Belt Untwisting Procedure
- Position latch plate near anchor point.
- Twist belt 180° above latch.
- Slide latch plate over folded belt.
- Continue until belt straightens.
Passenger Seat Belts (ALR)
Passenger belts include Automatic Locking Retractors for securing child seats.
- Pull belt fully to activate ALR.
- Allow belt to retract snugly.
- Listen for ratcheting sound.
WARNING:
- Rear passengers must wear seat belts.
- Seat belts reduce injury risk even with airbags.
- Unbelted occupants endanger others.
Inspect belts regularly. Replace damaged components through authorized service.
