Locking While Driving
When the vehicle moves off, as soon as you reach approximately 6 mph (10 km/h), the system locks the doors. The characteristic central locking noise is heard. The LED in the control switch on the dashboard central switch panel comes on.
During the journey, opening a door results in complete unlocking of the vehicle.
Anti-Intrusion Protection
Activating / Deactivating the Function: With the ignition on, press and hold this switch to activate or deactivate the function.
Door Open Warning Lamp
If this warning lamp comes on, check that all of your vehicle's doors are closed correctly.
Driving with the doors locked may make access to the interior more difficult in an emergency.
Cab and Load Space
Load Space:
- An initial press locks the front and rear doors, when they are closed.
- A second press unlocks the vehicle.
- The control switch is inactive when the vehicle has been locked using the remote control or the key from the outside.
- Press to lock/unlock the rear doors without changing the locking status of the cab.
- The doors can still be opened from the inside.
- The control switch LED:
- Flashes when the doors are locked with the vehicle stationary and the engine off.
- Comes on when the doors are locked and from the time the ignition is switched on.
Dials
- Distance recorder in kilometres / miles.
- Display screen.
- Fuel gauge, coolant temperature.
- Rev counter.
- Trip distance recorder / service indicator reset.
- Instrument panel lighting dimmer.
Centre Console with Screen
- Turn to the left: 24H or 12H is displayed.
- Turn to the right to select 24H or 12H.
- Turn to the left to complete the time adjustment.
- After approximately 30 seconds without any action, the screen returns to the normal display.
Centre Console without Screen
To adjust the time of the clock, use the left-hand button on the instrument panel. The display-time sequence is linked according to model (version). Access to the "Date" adjustment is only active when the model version offers a date in words.
- Turn to the left: the minutes flash.
- Turn to the right to increase the minutes (hold the button to the right for rapid scrolling).
- Turn to the left: the hours flash.
- Turn to the right to increase the hours (hold the button to the right for rapid scrolling).
Cooling System Warning
What you should do if the needle enters the red zone: Reduce your speed or let the engine run at idle.
What you should do if the warning lamp comes on:
- Stop immediately, switch off the ignition. The fan may continue to operate for up to approximately 10 minutes.
- Wait for the engine to cool down in order to check the coolant level and top it up if necessary.
- As the cooling system is pressurised, follow this procedure to avoid risk of scalding:
- Wait at least one hour after switching off the engine before carrying out any work.
- Unscrew the cap by 1/4 turn to allow the pressure to drop.
- When the pressure has dropped, check the level in the header tank.
- If necessary, remove the cap to top up.
- If the needle remains in the red zone, have the system checked by a CITROËN dealer or a qualified workshop.
Refer to chapter 7, "Levels" section.
Refer to chapter 7, "Fuel" section.
Fuel Gauge
