Citroen Berlingo Berlingo EV 2021 2024 Adjusting Electric and Manual Door Mirrors Car Owner Manuals

Adjusting Electric and Manual Door Mirrors

Adjusting Manual Door Mirrors

• Move the lever in all four directions to adjust.
• When the vehicle is parked, the door mirrors can be folded back manually.
• The mirrors are not equipped with automatic heating.

Adjusting Electric Door Mirrors

• Move the control to the right or left to select the corresponding mirror.
• Move the control in all four directions to adjust.
• Return the control to the central position.

Electric Folding / Unfolding

The mirrors can be folded or unfolded electrically from inside, with the vehicle parked and ignition on:

• Place the control in the central position.
• Turn the control downwards.

Heated Mirrors

The mirrors that have electric folding/unfolding can also be heated.

Forced Folding

If the mirror casing has come out of its initial location, reposition it manually or use the electric folding control while stationary.

Manual Rear View Mirror

• Two positions: day (normal), night (anti-dazzle).
• Push or pull the lever on the lower edge of the mirror to switch positions.
• Press the heated rear screen button if needed.

Electric Windows

Good Practice

If the electric windows meet an obstacle, reverse the movement by pressing the control. Ensure passengers are using the windows correctly. Be aware of children when operating the windows.

After several consecutive operations, a protection system may trigger allowing only closing. Wait ~40 minutes before operating again.

Lower the window fully, then raise it in steps until fully closed. Continue pressing for at least one second after reaching the closed position. Anti-pinch does not operate during this process.

Safety Anti-Pinch

• Stops and partially lowers the window when it meets an obstacle.
• Electrical functions deactivate approximately 45 seconds after ignition is off or after opening a front door if ignition is off.

Manual Mode

Press or pull the control without passing the point of resistance. Window stops when control is released. Identified by a symbol on the control.

Reinitialisation

After battery reconnection or malfunction, the safety anti-pinch function must be reinitialised.

One-Touch Mode

Press or pull the control beyond the point of resistance. The window opens or closes fully when released. Pressing again stops the movement.

Hazard Warning Lamps and Parking Brake

Parking Brake – Applying

• Pull the parking brake lever up to immobilise your vehicle.
• Ensure the brake is firmly applied before leaving the vehicle.
• Pull only with the vehicle stationary. If used while moving, pull gently to avoid locking the rear wheels.

Hazard Warning Lamps

Press the button; direction indicators flash. Can operate with ignition off. Use only in dangerous situations, emergencies, or unusual conditions.

When parking on a slope, direct wheels toward the pavement and pull the parking brake. No advantage in engaging a gear if the vehicle is loaded. Warning lamp indicates improper brake release.

Automatic Operation of Hazard Warning Lamps

During emergency braking, lamps come on automatically depending on deceleration force and switch off when accelerating. They can also be switched off manually using the dashboard button.

Releasing Parking Brake

Pull the lever up slightly and press the button to lower the lever.