Increase or Decrease Vehicle Speed & Cruise Control
Adjusting Vehicle Speed with RES/+ or –/SET
- Each press of RES/+ or –/SET changes vehicle speed by about 1 mph (1 km/h).
- Holding RES/+ or –/SET changes speed by about 5 mph (5 km/h) continuously.
To Adjust Vehicle Speed
If a slower vehicle is detected ahead, ACC may not accelerate your vehicle to maintain safe interval. Pressing –/SET after accelerating sets the current speed.
Following-Interval Adjustment
Press the (interval) button to cycle through extra long, long, middle, and short intervals. Choose the appropriate interval based on driving conditions and local regulations.
| Set Speed |
Short |
Middle |
Long |
Extra Long |
| 50 mph (80 km/h) |
83.3 ft / 25.4 m / 1.1 sec |
109.6 ft / 33.4 m / 1.5 sec |
153.8 ft / 46.9 m / 2.1 sec |
213.5 ft / 65.1 m / 2.9 sec |
| 65 mph (104 km/h) |
100.4 ft / 30.6 m / 1.1 sec |
137.4 ft / 41.9 m / 1.5 sec |
199.8 ft / 60.9 m / 2.1 sec |
282.7 ft / 86.2 m / 2.9 sec |
To Cancel ACC
- Press the CANCEL button
- Press the MAIN button
- Depress the brake pedal
- Depress the clutch pedal for five seconds or more
The ACC indicator (green) goes off.
Resuming Prior Set Speed
After canceling ACC, press RES/+ while driving at ≥25 mph (40 km/h) to resume prior set speed. Cannot resume if MAIN button is off; turn MAIN on first.
Automatic Cancellation
ACC may cancel automatically under the following conditions:
- Bad weather (rain, fog, snow, etc.)
- Dirty radar sensor
- Undetectable vehicle ahead
- Abnormal tires or skidding
- Mountainous/off-road driving for long periods
- Abrupt steering movements
- ABS, VSA®, or CMBSTM activation
- Parking brake applied manually
- Vehicle within ACC range too close
- Dirty camera or windshield
- Exceeding maximum load limit
- Passing through tunnels or enclosed spaces
- Ignoring tachometer shift down indication
- Engine speed in red zone or below 1,000 rpm
- Shifting to neutral temporarily
After conditions improve, press –/SET to resume prior speed.
Switching ACC to Cruise Control
Press and hold the (interval) button for 1 second to switch modes. Cruise Mode Selected appears for 2 seconds. Press again to switch back to ACC.
When to Use Cruise Control
- Desired speed ≥25 mph (40 km/h)
- Press –/SET to fix speed and activate Cruise Control; CRUISE CONTROL indicator turns on
- Straight Driving Assist is activated for easier straight-line driving
Adjust Vehicle Speed in Cruise Control
- Each press of RES/+ or –/SET changes speed by ~1 mph (1.6 km/h)
- Holding RES/+ or –/SET adjusts speed until released
Cancel Cruise Control
- Press CANCEL
- Press MAIN
- Depress brake pedal
- Depress clutch pedal ≥5 seconds
The CRUISE CONTROL indicator turns off.
Resuming Cruise Control Speed
Press RES/+ while driving ≥25 mph (40 km/h) to resume prior speed. Cannot resume if MAIN button is off.
At ≤22 mph (35 km/h), cruise control automatically cancels.
