If fitted on the vehicle, the switches will be placed in A or B.
With the ignition on, press the bottom of switch 1 or 2 to open the window or press the top of switch 1 or 2 to close it to the desired level.
With the ignition on, press switch 3 or 4 to lower the window to the required level. Lift switch 3 or 4 to raise the window to the desired height.
Avoid resting any objects against a half-open window: there is a risk that the electric window winder could be damaged. Closing windows can cause serious injury.
From the front passenger seat: Operate switch 5.
With the ignition on, press switch 6 or 7 to open the window or lift switch 6 or 7 to raise it to the desired height.
From the rear seats: Operate switch 10.
From the driver’s seat: With the ignition on, press switch 8 or 9 to lower the window to the required level. Lift switch 8 or 9 to raise the window to the desired height.
Press the top of switch 11 to lock the operation of the rear electric windows or on the bottom of switch 11 to unlock.
The driver can prevent operation of the rear electric windows by pressing switch 11.
Never leave your vehicle with the key or remote control inside and never leave a child (or a pet) unsupervised, even for a short while. They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or by locking the doors. If any part of the body becomes trapped, reverse the direction of the window immediately by pressing the relevant switch. Risk of serious injury.
Turn handle 12 to lower or raise the window to the desired height.
Pressing switch 1 provides:
Pressing switch 2 provides:
The passenger sun blind is fitted with a courtesy mirror 6 on the passenger side.
This offers support and can be held when the vehicle is being driven. Do not use these for getting into or out of the vehicle.
Pivot sun visor 1 or 5 against the windscreen or unclip it from its mounting 3 or 4 and pivot it against the door window.
This can be used for storing motorway tickets, cards, etc.
It can be housed in either position 1 or 4. Lift cover 3 to open. Remove the ashtray to empty it. If your vehicle is not fitted with a cigar lighter and an ashtray, these can be obtained from an approved Dealer. Connect accessories with a maximum power of 120 Watts only. Fire hazard.
With the ignition on, push in cigar lighter 2. It will spring back with a click when it is ready. Pull it out to use. After use, replace it without pushing it all the way in.
It is provided for connecting accessories approved by the Technical Department with a maximum power of 120 Watts.
