Renault Duster 2010-2025 DISPLAY AND INDICATORS Car Owner Manuals

Renault Duster 2010-2025 DISPLAY AND INDICATORS

DISPLAY AND INDICATORS (2/2)

Coolant Temperature Indicator

The number of squares lit depends on the engine coolant temperature. There is no warning unless the last three squares light up.

Multifunction Display A

Total mileage recorder, distance travelled trip mileometer and clock.

OR

Trip Computer and Warning System

Refer to the information on the “Trip computer and warning system”.

Multifunction Key 5

• Display selection
  By pressing the button you can shift from the total mileage recorder, trip mileometer and time or vice-versa.
• Resetting the trip mileage recorder
  Once the trip mileage display is selected, press and hold the button.
• Resetting the clock
  Refer to the information on the “Clock”.

TRIP COMPUTER AND WARNING SYSTEM (1/4)

Display 1

General Reset and Trip Mileage Recorder Reset Key 2

To reset the trip mileage recorder, the display must show the Trip mileometer function. Press and hold button 2.

Display Selection Key 3

Keep pressing key 3 briefly to scroll through the following information (depending on the vehicle) in sequence:

• a) Total mileage recorder
• b) Trip mileage recorder
• c) Fuel used
• d) Average consumption
• e) Estimated range
• f) Distance travelled
• g) Average speed

The information display depends on the vehicle equipment and country.

TRIP COMPUTER AND WARNING SYSTEM (2/4)

Interpreting Some of the Values Displayed After Resetting

The values showing average fuel consumption, range and average speed become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you may notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed.

The fuel consumption may decrease when:

• The vehicle stops accelerating.
• The engine reaches its operating temperature.
• Driving from a built-up area onto the open road.

If the average fuel consumption decreases, the range will increase.

You may also notice that the average fuel consumption increases when the vehicle is stationary and the engine idling. This is normal, since the computer takes account of fuel used during idling.

Manually resetting the journey parameters:
With the display showing one of the journey parameters, press button 2 until the display is reset.

Automatically resetting the journey parameters:
The reset is automatic when the capacity of one of the memories is exceeded.

The information display depends on the vehicle equipment and country.

TRIP COMPUTER AND WARNING SYSTEM (3/4)

The information display depends on the vehicle equipment and country.

Examples of Display Selections by Repeatedly Pressing 3

• a) Total mileage recorder
• b) Trip mileage recorder
• c) Fuel used
  Fuel used since the last time the reset button was pressed.
• d) Average fuel consumption
  Average fuel consumption since the last reset. Displayed after driving approximately 400 metres and calculated using the distance travelled and fuel used.

TRIP COMPUTER AND WARNING SYSTEM (4/4)

The information display depends on the vehicle equipment and country.

Examples of Display Selections by Repeatedly Pressing 3

• e) Estimated range with remaining fuel
  This range takes into account the average fuel consumption since the last reset. Displayed after driving approximately 400 metres.
• f) Distance travelled
  Distance travelled since the last reset.
• g) Average speed
  Average speed since the last reset.