If equipped, turn the hand crank on each door to manually raise or lower the manual windows.
Power windows work when the ignition is on, in ACC/ACCESSORY, or when Retained Accessory Power (RAP) is active.
Press the window switch to open or pull it to close the window. Windows may be temporarily disabled if used repeatedly within a short time.
This feature prevents the rear door passenger window switches from operating except from the driver position.
Press 2 to engage the rear window lockout feature. The indicator light turns on when engaged. Press 2 again to disengage.
All windows can be opened without holding the switch. Press the switch down fully and release to express-open the window.
If equipped, pull the switch up fully and release to express-close the window. Briefly press or pull the switch again to stop express movement.
If equipped, press and hold L to open all windows. Release L to stop movement. Use the window switches to close each window.
The express-close feature will reverse window movement if it contacts an object. Extreme cold or ice may cause auto-reversal. Normal operation resumes after conditions are cleared.
With the engine on, pull and hold the window switch to override the automatic reversal system if conditions prevent the window from closing.
Programming may be required if the battery has been disconnected or discharged.
If equipped and enabled, press and hold K on the RKE transmitter to open the windows remotely.
If equipped, the power sliding rear window operates when the ignition is on, in ACC/ACCESSORY, or RAP is active. <
