Replacing Components
Onboard Vehicle Tool Kit
The onboard vehicle tool kit is located under the first aid kit behind the left folding cover in the trunk.
Wiper Blade Replacement
Hints
- Do not fold down the wipers if wiper blades have not been installed; this may damage the windshield.
Front: Replacing the Wiper Blades
- Fold up the wiper arms (refer to page 75).
- Fold up the wipers.
- Position the wiper blade in a horizontal position.
- Remove the wiper blade toward one side.
- Insert the new wiper blade in reverse order of removal until it locks in place.
- Fold down the wipers.
Rear: Replacing the Wiper Blades
- Lift off the wiper fully and pull off the wiper blade.
- Attach a new wiper blade. It must engage audibly.
- Fold down the wipers.
Lamp and Bulb Replacement
Hints
- Lights and bulbs are essential for vehicle safety. If you are unfamiliar with procedures, have the service center perform them.
- Only change bulbs when they are cool to avoid burns.
- Always turn off the lights affected to prevent short circuits.
- Observe the instructions provided by the bulb manufacturer to avoid injury or equipment damage.
- Have any work on xenon headlights performed only by a service center due to high voltage risk.
- Do not touch the glass of new bulbs with bare hands. Use a tissue, cloth, or hold by the base.
Light-Emitting Diodes (LEDs)
Some equipment uses LEDs installed behind a cover. These are Class 1 LEDs.
- Do not remove the covers or stare into the unfiltered light for prolonged periods to avoid retina irritation.
Headlight Glass
Condensation may form inside the external lights in cool or humid weather. Driving with the lights on will evaporate the condensation. The headlight glass does not need replacement. If excessive water forms, have the service center check it.
Headlight Setting
The headlight adjustment can be affected by changing lights or bulbs. Have the headlights checked after replacement.
