Note: The voice system has been designed to recognise a number of languages. However, Land Rover cannot guarantee the system will be compatible with every accent group within those languages. Please speak to your Dealer/Authorised Repairer about testing the Voice System for compatibility with a particular accent group.
1. Voice button: Press briefly to start a voice session. A pop up will appear on the touch screen. Press and hold to cancel a voice session.
Note: Briefly press the Voice button during a voice session, to interrupt audible feedback. Wait for the tone to sound before giving the next command.
2. Voice symbol: Indicates that a command is available. Wait for the symbol to appear and a tone to sound before using the command.
3. Command list: Appears on the pop up panel, providing feedback and available commands at each stage of the voice session. Say an available command.
Note: As the commands are listed before the system is ready to listen, it is important to wait for the voice symbol to appear alongside the relevant command, before using the command.
4. When displayed, say Cancel to cancel the current voice session.
5. When displayed, say Help to get assistance during a voice session.
Note: The currently selected user (User 1 or User 2) is identified at the bottom of the command list.
Note: If a listed item is longer than the available space on the menu, ...> will appear. Use the seek controls on the steering wheel to view the entire entry.
To listen to a tutorial detailing the operation of the Voice system:
1. Briefly press the Voice button to start a voice session.
2. Wait for the tone to sound, then say Voice tutorial.
Alternatively, the tutorial can be selected using the touch screen, as follows:
1. Select Setup from the touch screen Home menu.
2. Select Voice from the Setup menu.
3. Select Operating guide from the Voice settings menu.
4. Select Voice tutorial.
The voice tutorial can be cancelled at any time by touching the on-screen pop-up or by pressing and holding the Voice button.
This is a feature designed to enable the system to better recognise the vocal characteristics of a user, once the training has been completed.
To carry out Voice training:
1. Select Setup from the Home menu.
2. Select Voice from the Setup menu.
3. Select Voice training from the Voice settings menu.
4. Select User 1 or User 2, to start the training.
5. Follow the on-screen and audible instructions.
The training session can be cancelled at any time by touching the on-screen pop-up or by pressing and holding the Voice button.
Voice tags enable the user to personalise the Voice system so that a single name can be used to call-up a navigation destination, telephone number or radio channel.
To add a Voice tag:
1. Briefly press the Voice button to start a Voice session.
2. Wait for the tone to sound then say Phone, Navigation or Radio.
3. Say Store voicetag.
Alternatively, Voice tags can be managed via the touch screen as follows:
1. Select Setup from the Home menu.
2. Select Voice from the Setup menu.
3. Select Voicetags from the Voice settings menu.
4. Select the system which the Voice tag is to activate (Phone, Navigation or Radio).
Follow the on-screen and audible instructions.
To request the display of POI (Point Of Interest) identifiers on the navigation display:
Say Navigation, followed by the name of the desired POI category from the following list:
