Sustained exposure to high sound levels can damage your hearing.
Note: The maximum volume level will be restricted if the audio unit is used with the engine switched off.
1. Audio system on/off: Press to switch on and off.
Note: The audio system will switch off automatically after 10 minutes if the ignition is turned off.
2. Volume control: Rotate to adjust volume.
Note: The maximum volume level will be restricted if the audio system is used with the engine switched off.
3. PHONE: Press to select telephone menu. See 112, TELEPHONE SYSTEM.
4. RADIO waveband select (FM, FM AST, AM, AM AST, plus if fitted DAB1, DAB2).
5. AUX input select.
6. CD eject button.
7. CD loading slot.
8. Keypad.
9. Seek up: Short press to select the next station upward in frequency or to select the next track on the chosen audio source. Long press to enter radio manual seek mode or to scan forward through a CD track.
In radio manual seek mode, further short presses will change the frequency in single increments.
10. OK and menu navigation control.
Use the menu navigation control to move any menu cursor or highlight. When the required option is highlighted, press the OK button to select.
11. Seek down: Short press to select the previous radio station downwards in frequency or to select the previous track on the chosen audio source.
If the AVC level is set to zero, there will be no volume increase. With a low level setting, the volume increase at speed will be minimal. If a high level setting is used, there will be a noticeable increase of volume at greater speed.
To set the AVC level:
1. Press the MENU button, then using the menu navigation control (10) press up or down to select AUDIO settings to access the volume settings menu. Select Adaptive Vol.
2. Use the left and right buttons on the menu navigation control (10) to adjust the AVC setting.
3. Press OK to confirm the selection.
Press the Tone button (14) to display the Tone menu. The settings for bass, treble, balance and fade can be adjusted using the navigation buttons.
Press OK to store the settings and return to the previous screen.
Note: If no adjustment is made within 10 seconds, the display will revert to the previously displayed screen.
AutoStore can be used to store the stations with the strongest signals available, either from the AM or the FM waveband.
Using AutoStore:
1. Press RADIO button (4) to select the desired waveband.
2. Find a station. If necessary, use the seek buttons (9 and 11).
3. Press and hold the RADIO button until the display confirms that AutoStore is in progress.
Long press to enter radio manual seek mode or to scan backwards through a CD track.
In radio manual seek mode, further short presses will change the frequency in single increments.
12. MENU: Press to select audio system menu, with the following options:
• Audio settings.
• Clock settings.
• Language.
13. CD: Press to select CD mode.
14. Tone: Press to select the tone menu.
15. TA: Traffic information.
16. Audio system information display.
17. MODE: Press repeatedly to scroll through all audio modes.
18. Steering wheel volume up.
19. Steering wheel volume down.
20. Seek down: Short press to select the previous radio preset or the previous track on the chosen audio source. Long press to scan backwards through a track.
21. Seek up: Short press to select the next radio preset or the next track on the chosen audio source. Long press to scan forwards through a track.
