Exiting the vehicle
Once the perimeter alarm is armed, the alarm system will sound if:
Note: This setting should be used in circumstances such as travelling on a ferry, when pets are to be left in the vehicle, or if a window must be left open etc.
When the full alarm is activated, the alarm system will sound if:
Note: In this state, an open window or sunroof will cause the alarm to sound due to the movement of air currents. Ensure all windows and the sunroof are fully closed before double locking the vehicle.
The interior protection feature of the full alarm system may be temporarily disabled via the Vehicle set-up menu (see 52, INTERACTIVE CONTROLS).
Note: Once enabled, this setting will activate the next time the vehicle is double locked with the Smart Key.
Warning: Before exiting the vehicle, always ensure that the gear selector is in the Park (P) position, the engine is turned off, the parking brake is applied and the Smart Key is removed from the vehicle.
Single locking secures the vehicle and prevents the doors from being opened from outside. The doors may still be unlocked and opened from inside the vehicle. In this state, only the perimeter alarm is activated.
Warning: Before exiting the vehicle, always ensure that the gear selector is in the Park (P) position, the engine is turned off, the parking brake is applied and the Smart Key is removed from the vehicle.
Warning: Never double lock the vehicle with people, children, or pets inside. In the event of an emergency they would be unable to escape and the emergency services would be unable to release them quickly.
Double locking secures the vehicle and prevents the doors being opened from inside or outside of the vehicle. The doors cannot be unlocked or opened from inside the vehicle when double locked.
This provides additional security if the vehicle is left unattended. The vehicle cannot be opened by breaking a window and operating the door locks from inside.
Additionally, double locking also activates the full alarm system.
Warning: Ensure that no children, pets, or obstructions are in any open aperture before operating global closing. Safety mechanisms are in place to prevent serious injury, however injuries can still occur.
Press and hold the lock button for 3 seconds. The vehicle will single lock and the full alarm will be activated immediately. After 3 seconds any open windows will be closed.
This feature can be enabled or disabled via the Vehicle set-up menu (see 52, INTERACTIVE CONTROLS).
When attempting to lock the vehicle, if one or more of the doors, the bonnet or the tailgate are not fully closed, the vehicle will fail to lock and the horn will emit two tones.
The vehicle will not fully lock until all doors, the bonnet and the tailgate are completely closed.
Warning: Never double lock the vehicle with people, children or pets inside. In the event of an emergency they would be unable to escape, and the emergency services would be unable to release them quickly.
From inside the vehicle, all the doors can be locked by pressing either the driver or passenger lock lever.
Each rear door can be individually locked by pressing the appropriate locking lever.
To unlock and open a front door, pull the door handle. To unlock and open a rear door, first operate the lock lever, then pull the door handle.
Master lock and unlock buttons allow the vehicle to be locked or unlocked by pressing the respective button on the door.
Note: The master unlock button is inhibited when the vehicle is locked with the Smart Key.
The vehicle will not lock automatically.
Note: Keyless locking will only activate if the Smart Key is detected outside the vehicle. If no Smart Key is present when the button is pressed, two warning tones will sound.
To initiate global window closing, press and hold the keyless locking button for 3 seconds. This will also lock the vehicle and activate the alarm.
Note: The windows will close only while the button is depressed. To fully secure the vehicle, continue to depress the button until all windows are fully closed.
If the alarm has been triggered it can be deactivated by pressing the Smart Key unlock button, or by positioning the Smart Key underneath the steering column (see 79, IF THE ENGINE FAILS TO START).
