Warning: Do not ignore warning messages. Take appropriate action and, when necessary, seek qualified assistance before driving the vehicle.
If more than one message is active, each is displayed in turn for 2 seconds in order of priority.
Note: The message centre messages and their meanings are detailed where necessary within the appropriate subject sections.
The computer memory stores data for a journey or series of journeys until it is reset to zero.
The displayed information is for guidance only, as it can be affected by traffic, road, and weather conditions.
Three independent memories are available: A, B, and Auto. A and B memories can be reset independently, while the Auto trip will reset after every ignition cycle as the vehicle moves.
Trip computer information is displayed on the instrument panel.
A short press (1 second or less) or a series of short presses of the i button will change the trip computer display.
The available options are:
To reset the trip computer values to zero, press and hold the i button for 2 seconds.
To reset the fuel consumption figure, press and hold the i button until the display clears.
There are three trip memories available: A, B, and Auto. You can specify which trip memory is viewable using the i button.
To reset Trip A or Trip B memory, display the trip memory you wish to reset and press and hold the i button until the message Resetting Trip A or Resetting Trip B is displayed.
Continue to hold the button for another 2 seconds to reset the Auto trip memory.
The Auto trip memory also resets automatically each time the engine is started and the vehicle moves.
Trips may be added together to record a continuous journey.
Press the i button when Auto memory figures are displayed and Adding previous journey will appear on the screen. Press the i button for longer than 1 second to add the previous trip information to the current trip and display the cumulative total.
To delete the added trip, press the i button again while Auto memory figures are displayed. When Deleting previous journey appears, press and hold the i button for longer than 1 second to remove the previous trip from the total.
Shows the distance travelled since the last memory reset.
The maximum trip reading is 9,999.9 kilometres or miles. The computer will automatically reset to zero if this distance is exceeded.
Displays the predicted distance, in miles or kilometres, that the vehicle should travel on the remaining fuel, assuming fuel consumption remains constant.
The trip computer readings can be changed between metric, imperial, and mixed units in the Trip Computer menu of the message centre.
See 52, Interactive Controls.
Note: Temperature display can be changed between °C (Celsius) and °F (Fahrenheit) independently of metric or imperial units.
The service interval message is displayed only when the vehicle has less than 3,200 km (2,000 miles) remaining before service is due.
When the ignition is switched on and the service countdown has started, SERVICE REQ'D XXXX km (XXXX MLS) is displayed in the message centre.
When the service distance has been reached, SERVICE REQUIRED is displayed.
Note: If no service interval indicator is displayed during the vehicle service cycle, ensure that the vehicle is serviced in accordance with the intervals stated in the Service Portfolio.
