1. Set target speed, or increase speed.
2. Resume set speed.
3. Decrease set speed.
4. Cancels cruise control operation without erasing memorised speed.
Note: Cruise control is not available when using Hill Descent Control or when a Terrain Response special program has been selected.
Note: Do not use cruise control when driving off-road.
Note: Do not use cruise control with SPORT mode selected.
When setting the cruise control to the speed limit, it is important to remember that it is possible for the vehicle speed to increase when travelling downhill. This may result in the vehicle speed exceeding the speed limit.
Note: Cruise control can only be engaged at speeds in excess of 30 km/h (18 mph).
Accelerate until the desired speed is reached, then press the + switch (1) until the warning lamp illuminates. This sets the vehicle speed into the system's memory. Cruise control will now maintain that speed.
The cruise control warning lamp will illuminate to confirm cruise control is operational. Speed can be increased using the accelerator pedal as normal. As soon as the accelerator pedal is released, the vehicle speed will return to the set cruising speed.
Note: If the accelerator pedal is pressed for more than 5 minutes, cruise control will be cancelled.
To decrease the cruising speed, press and hold the - switch (3). Release the switch when the desired speed is reached, the new speed will be set and maintained.
The set speed can be decreased in steps of 2 km/h (1 mph) by briefly pressing the - switch.
Press and hold the SET+ switch (1) to increase cruising speed. Release the switch when the desired speed is reached, the new speed will be set and maintained.
Cruising speed can also be increased using the accelerator. When the desired speed is reached, press the SET+ switch to set and maintain the new speed, and release the accelerator.
The set speed can be increased in steps of 2 km/h (1 mph) by briefly pressing the SET+ switch.
