Warning: Never place objects on top of the loadspace cover. During an accident or sudden maneuver, loose objects can cause serious injury or death.
1. Pull the rigid portion of the cover to unroll. Engage the end pieces into the recessed features moulded into the loadspace sides.
Warning: When fitting the loadspace cover in position, ensure that the paddle returns to the flush (horizontal) position. Failure to do so may allow the loadspace cover to move during an accident or sudden maneuver.
Warning: Do not store the loadspace cover loose in the vehicle. During an accident or sudden maneuver, the loadspace cover could cause serious injury or death.
To assist in safely securing large items of luggage, four fixing points are located in the rear loadspace floor.
Warning: All items carried in the loadspace area should be properly secured. If the vehicle is involved in an accident, or subject to sudden braking or change of direction, loose items can cause serious injury.
Note: A range of approved luggage retention accessories are available from your Land Rover Dealer/Authorised Repairer.
2. The loadspace cover can be fitted in two positions. The foremost fitting is close behind the second row of seats; the rearmost is behind where the third row of seats are or would be fitted.
3. To retract the loadspace cover, disengage the ends from the recessed areas and allow the soft portion of the cover to retract into its housing. Fold the rigid portion back under the unit and press to clip in place.
4. In 7-seat vehicles only, the loadspace cover may be stowed behind the second row seats when not in use. See 19, Folding the Seats (7-seat vehicle) for more details of loadspace cover stowage.
Warning: Never place the loadspace cover behind the second row of seats if the third row is to be occupied. Remove the stowed loadspace cover before moving the seats.
Warning: Do not attempt to raise the second row seats into the upright position, or tip them forward for third row access, while the loadspace cover is stowed behind the second row, as damage will result.
In 5-seat vehicles, the cover must be removed from the vehicle altogether if not in use.
5. To remove the loadspace cover, first pull up the paddle at the right-hand end of the cover.
6. Lift the right-hand end of the unit and pull away from the left-hand side.
Note: It is easier to remove or refit the loadspace cover if the second row seat backs have been tipped forward.
Note: Installation of the loadspace cover is the reverse of removal.
