The camera home page is accessed from the Home menu screen. If Cameras has not been set as a shortcut, touch Extra Features to display the list.
With the engine running and Park or Neutral selected, the surround camera system uses 5 discretely placed cameras to assist in manoeuvring the vehicle.
1. Enlarge: To enlarge a camera view, touch the image then touch the Enlarge soft key. Any 2 images can be selected and enlarged to view side-by-side on the screen.
When viewing the two images, one of them can be selected to view as a full screen image. It can then be zoomed into and panned around using the magnifier and arrow icons.
2. Proximity View: Touch to select a combination of 3 images from the front and passenger side cameras.
Automatic Proximity View – Japan only: When Drive or Reverse is selected, the forward or rear view will be displayed. Once the vehicle speed exceeds 18 km/h (11 mph) or the return icon is pressed, the camera screen will disappear.
Note: Proximity view can be accessed at any time by touching Proximity View on the Camera home page.
3. Special Views: A selection of pre-set views can be displayed by selecting Special Views. They are provided to assist with difficult manoeuvres and are:
• Kerb view: Shows views from the 2 front cameras.
• Junction view: Shows views from the 2 side cameras.
• Trailer view: Shows the rear camera view.
4. Camera Setting – Japan only: Touch to access the camera options page. To deactivate the Semi-auto camera functionality select Off. The Proximity view is now only accessible by manual activation using the Proximity View soft key.
5. Tow Assist: Touch to display trailer guidance set-up screen.
Selecting Proximity View will display a combination of three images from the front and passenger side cameras.
If the colour of the camera position arrow in the display changes from blue to red, the system has detected that the camera is dirty. Clean the camera in accordance with the guidelines given on page 190, CLEANING THE EXTERIOR.
Note: Trailer guidance requires a connected trailer to be fitted with a tracking target sticker, which must be attached according to specific instructions. Ask your Dealer / Authorised Repairer for details.
Note: This feature may not operate with all trailer designs.
Trailer guidance aids trailer reversing by displaying information on the touch screen.
Trailer guidance becomes active when a trailer is attached to the vehicle and the trailer electrical plug is attached to the vehicle socket.
The screen will display a choice for connection. Select YES to move to the setup screen. Select NO to return to the previous screen.
Note: If the connection is not detected, setup can be manually prompted by touching the Tow Assist soft key on the Camera menu.
