Failure to follow the warnings and instructions for proper use of the Rear-view Monitor could result in serious injury or death.
• The Rear-view Monitor is a convenience feature and is not a substitute for proper reversing. Always turn and look out the windows and check mirrors to be sure it is safe to move before operating the vehicle. Always reverse slowly.
• The system is designed as an aid to the driver in showing large stationary objects directly behind the vehicle to help avoid damaging the vehicle.
• The distance guideline and the vehicle width line should be used as a reference only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different from the actual distance between the vehicle and displayed objects.
There is a transparent cover over the camera lens. Do not scratch the cover when cleaning dirt or snow from it.
The Rear-view Monitor system automatically shows a view from the rear of the vehicle when the vehicle is shifted into the R (Reverse) position.
The radio can still be heard while the Rear-view Monitor is active.
To display the rear view, the Rear-view Monitor system uses a camera located just above the vehicle’s number plate.
When the ignition is switched ON, shift the transmission to the R (Reverse) position to operate the Rear-view Monitor.
Guiding lines that indicate the vehicle width and distances to objects with reference to the bumper line are displayed on the monitor.
Indicate the vehicle width.
Indicate the predictive course when reversing.
The predictive course lines are displayed when the vehicle is in the R (Reverse) position and the steering wheel is turned.
The predictive course lines move depending on how much the steering wheel is turned and are not displayed while the steering wheel is in the straight-ahead position.
The vehicle width guidelines and the width of the predictive course lines are wider than the actual width and course.
Indicate distances from the vehicle body:
• Red line: approximately 0.5 m (1.5 ft)
• Blue line: approximately 1 m (3 ft)
• Blue line: approximately 2 m (7 ft)
• Blue line: approximately 3 m (10 ft)
The displayed guidelines and their locations on the ground are for approximate reference only.
Objects on uphill or downhill surfaces or projecting objects will actually be located at distances different from those displayed in the monitor relative to the guidelines.
When in doubt, turn around and view the objects as you are reversing, or park and exit the vehicle to check the position of objects behind the vehicle.
