Occasionally remove loose dust from the interior trim, plastic parts, and seats using a vacuum cleaner or soft-bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dampened in mild soap solution, then wipe clean with a dry, soft cloth.
Regular care and cleaning is required in order to maintain the appearance of the leather. Before using any fabric protector, read the manufacturer’s recommendations. Some fabric protectors contain chemicals that may stain or bleach the seat material.
Use a soft cloth dampened only with water to clean the meter and gauge lens covers.
Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions:
Carefully read and follow the manufacturer’s instructions before using air fresheners.
NISSAN recommends the use of Genuine NISSAN floor mats. The use of Genuine NISSAN floor mats (where fitted) can extend the life of your vehicle carpet and make it easier to clean the interior. Regardless of what mats are used, be sure they are fitted for your vehicle and are properly positioned in the foot well to prevent interference with pedal operation at all times. Mats should be maintained with regular cleaning and replaced if they become excessively worn.
This vehicle includes front floor mat brackets to act as a floor mat positioning aid. Genuine NISSAN floor mats have been specially designed for your vehicle. Position the mat by placing the floor mat bracket hook through the floor mat grommet hole while centering the mat in the foot area. Push the grommet hole onto the hook firmly and secure it. Periodically check that the mats are properly positioned.
Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film.
Use a soft cloth dampened only with water to clean the automatic anti-dazzling inside rear-view mirror (where fitted).
CAUTION: Do not use glass cleaner. Doing so will reduce the sensitivity of the sensor, resulting in improper operation.