Ford Transit

Windows and Mirrors

WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury.

WARNING: When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings.

Press the control to open the window. Lift the control to close the window.

Note: The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.

To reduce wind noise or pulsing noise when just one window is open, slightly open the opposite window.

One-Touch Open (If Equipped)

Fully press the control and release it. Press again or lift it to stop the window.

One-Touch Close (If Equipped)

Fully lift the control and release it. Press again or lift it to stop the window.

Bounce-Back (If Equipped)

The window automatically stops and reverses if it detects an obstruction.

Overriding Bounce-Back

WARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle.

  1. Close the window twice until it reaches the point of resistance and let it reverse.
  2. Lift the control within two seconds to override the feature and close the window. Bounce-back is now disabled and you can close the window manually.

Note: If the window does not close, have your vehicle checked as soon as possible.

Resetting Bounce-Back

WARNING: Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle.

Carry out all steps within 30 seconds of starting the sequence.

  1. Close the window.
  2. Press and hold the switch until the window is fully open. Keep the switch fully pressed for a few seconds.
  3. Lift and hold the switch until the window is fully closed. Keep the switch held for a few seconds.
  4. Press and hold the switch until the window is fully open. Keep the switch fully pressed for a few seconds.
  5. Lift and hold the switch until the window is fully closed. Keep the switch held for a few seconds.

Note: Repeat the procedure if the window does not close when you use one-touch.

Exterior Mirrors

Power Exterior Mirrors

WARNING: Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.

E71280

  • Left-hand mirror switch. A
  • Neutral. B
  • Right-hand mirror switch. C

E71281

Move the adjustment control in the direction of the arrows to adjust the mirror.

Folding the Mirrors (If Equipped)

E72184

Move the adjustment control downward to fold or unfold the mirrors.

Note: The power folding mirrors operate with the ignition on, and for several minutes after you switch the ignition off.

Note: You can only fold the mirrors when the adjustment control is set to position B.

Note: If you fold and unfold the mirrors several times within one minute, the power fold function may turn off to protect the motors from overheating.

Note: Do not manually fold or unfold power folding mirrors.

Loose Mirror

If your power-folding mirrors are manually folded, they may not work properly, even after you re-position them. You need to reset them if:

  • The mirrors vibrate when you drive.
  • The mirrors feel loose.
  • The mirrors do not stay in the folded or unfolded position.
  • One of the mirrors is not in its normal driving position.

`