The sensor on the left-hand side is mostly obstructed and zone coverage on that side is severely reduced.
The sensors are behind the rear bumper on both sides of your vehicle.
Note: Keep the sensors free from snow, ice and large accumulations of dirt.
Note: Do not cover the sensors with bumper stickers, repair compound or other objects.
Note: Blocked sensors could affect system performance.
If the sensors are blocked, a message may appear in the information display when you shift into reverse (R).
The system may not correctly operate when any of the following occur:
Note: The system may not correctly operate when towing a trailer. For vehicles with an approved trailer tow module and tow bar, the system turns off when you attach a trailer. For vehicles with an aftermarket trailer tow module or tow bar, we recommend that you switch the system off when you attach a trailer.
Cross traffic alert remains on when you attach a trailer in vehicles equipped with a Blind Spot Information System with Trailer Tow under the following conditions:
See Blind Spot Information System (page 195).
To switch cross traffic alert on or off, use the Information display. See General Information (page 81).
Note: The system turns on every time you switch the ignition on. To permanently switch the system off, contact an authorized dealer.
When the system detects an approaching vehicle a tone sounds, a warning lamp illuminates in the relevant exterior mirror and arrows appear in the information display to show which side the approaching vehicle is coming from.
Note: If arrows do not display, a message appears in the information display.