Operate lever A fig. 23 to adjust the mirror into two different positions: normal or anti-glare.
The mirror is fitted with a safety device that causes its release in the event of a violent impact with a passenger.
On some versions, an electrochromic mirror is available, that can automatically modify its reflecting action to prevent dazzling the driver fig. 24.
The electrochromic mirror has an ON/OFF button to activate/deactivate the electrochromic anti-glare function.
When reverse gear is engaged, the mirror is automatically set for daytime use.
The mirrors can only be adjusted with the ignition device at MAR. Select the desired mirror using device A fig. 25:
To adjust the selected mirror, press button B in the four directions shown by the arrows.
IMPORTANT: Once adjustment is complete, rotate device A to position 0 to prevent accidental movements.
To fold back the mirrors, press button C. Press the button again to restore the mirrors to the driving position.
Once the desired command has been given, before the door mirror gets to the complete closing or opening position, its travel can be reverted by pressing button C again.
IMPORTANT: Excluding the use of this function in narrow streets, the mirrors must always be left in the open position (position 1 fig. 26) and never be folded (position 2) while driving.
If one of the door mirrors has been moved manually, it may not maintain its position while driving. In this case, the following realignment procedure must be carried out:
